WAKOL PU 280 Moisture Barrier is a single component product and therefore ready for immediate use. No mixing or special tool required. Mixing errors are fully ruled out. After use, the container can be simply sealed again and stored for the next use.Install flooring 40-50 minutes after application of WAKOL PU 280
Moisture Barrier even under difficult construction site conditions.
No other method is as fast.No moisture test required: Two coats of WAKOL PU 280
Moisture Barrier will block 100% rH with no moisture testing
required when the following conditions are met: The concrete
must be surface dry, at least 28 days old, and must have an intact
waterproofing vapor membrane beneath the slab.
Loba and Wakol are leading suppliers for adhesives and finishes within the wood and resilient flooring industry with innovative solutions and systems from the subfloor to the finished floor.
|Fast – fastest moisture barrier on the market |Super fast – install wood flooring in approximately 45 minutes |Simple – applies easily with a roller |Economical – one component: no mixing, no waste |100% active substance |Water free, solvent free |VOC free, 0 g/l US regulatory |AirQuality Seal, EMICODE EC1 PLUS |No odor |Blocking of residual moisture on cement screed and concrete without previous moisture measurement |Blocking of residual moisture in concrete and other non-moisture-sensitive subfloors |Encapsulates old adhesive residue
